To apply for the following documents are required
For legal entities
For individuals

For legal entities
  1. Specification of the proposed radioactive content, specifying its physical and chemical composition and radiation character (necessarily )
  2. The SPS design specification, including a full set of engineering and technical documentation (drawings), lists of materials used and manufacturing methods (necessarily )
  3. Test performed and test results report (necessarily )
  4. SPS operation and maintenance manualb (necessarily )
  5. Specification of the containment system construction materials, as well as of the specimen to be selected and tests proposed if the SPS is designed for the maximum service pressure that is more than the gauge pressure of 100 kilopascal (necessarily )
  6. Rationale for any allowance pertaining to the fuel characteristics as per the safety analysis as well as description of any pre-transportation measurements required within the requirements of the country of origin if the proposed radioactive content represents irradiated fuel (necessarily )
  7. Graphic imaging sized not more than 21x30 centimeters illustrating the SPS layout and suitable for reproduction (necessarily )
  8. SPS nuclear, radiation and nuclear physical safety examination results (necessarily )
  9. Information on any proposed additional maintenance control measures to be applied during transportation that are required to ensure packaging safety or to compensate for deficiencies (necessarily )
  10. Specification of the environment conditions range (temperature, solar insolation) expected during transportation and taken into account in the design (necessarily )
  11. A recorded copy of SPS design permit certificate approved by authorized body of the other state (necessarily )
  12. Detailed description of shipping packaging set (SPS) transportation radiation protection program (necessarily )
  13. Information on any vehicle type restrictions and special procedures for cargo loading, transportation, unloading or handling (necessarily )
  14. Description of any special packaging conditions required for safe heat transfer from the SPS, taking into account the use of different vehicle type and transport means or cargo container (necessarily )
  15. Request (necessarily , job specifications )

For individuals
  1. Specification of the proposed radioactive content, specifying its physical and chemical composition and radiation character (necessarily )
  2. The SPS design specification, including a full set of engineering and technical documentation (drawings), lists of materials used and manufacturing methods (necessarily )
  3. Test performed and test results report (necessarily )
  4. SPS operation and maintenance manualb (necessarily )
  5. Specification of the containment system construction materials, as well as of the specimen to be selected and tests proposed if the SPS is designed for the maximum service pressure that is more than the gauge pressure of 100 kilopascal (necessarily )
  6. Rationale for any allowance pertaining to the fuel characteristics as per the safety analysis as well as description of any pre-transportation measurements required within the requirements of the country of origin if the proposed radioactive content represents irradiated fuel (necessarily )
  7. Graphic imaging sized not more than 21x30 centimeters illustrating the SPS layout and suitable for reproduction (necessarily )
  8. SPS nuclear, radiation and nuclear physical safety examination results (necessarily )
  9. Information on any proposed additional maintenance control measures to be applied during transportation that are required to ensure packaging safety or to compensate for deficiencies (necessarily )
  10. Specification of the environment conditions range (temperature, solar insolation) expected during transportation and taken into account in the design (necessarily )
  11. A recorded copy of SPS design permit certificate approved by authorized body of the other state (necessarily )
  12. Detailed description of shipping packaging set (SPS) transportation radiation protection program (necessarily )
  13. Information on any vehicle type restrictions and special procedures for cargo loading, transportation, unloading or handling (necessarily )
  14. Description of any special packaging conditions required for safe heat transfer from the SPS, taking into account the use of different vehicle type and transport means or cargo container (necessarily )
  15. Request (necessarily , job specifications )